|
|
| Avoid
downtime in your Fiber Network by using our Fiber Optic
TAP/Splitter. Once
in place it enables you to monitor half/full duplex communication
and move test equipment without breaking the circuit.
It offer a perfect and cost effective solution to tap
networks for IDS (security), SNMP (management) and
RMON (remote) and Protocol analysis.
|
Stand
alone model
|
| The
Fiber Optic Tap is easy to install, fault tolerant, transparent to the network. It monitors the communication
between two network devices and is designed for use in
Ethernet, fast and GigaBit Ethernet, ATM, SONET, FDDI
networks and speed up to OC12.
It
has 3 duplex SC adapters, whereof 2 for the network and 1
for the analyser. The TAP will continue to pass information
in the network also when the analyser is taken away.
It
is compact and housed in rigid metal enclosure. It requires
no electrical power source. |
Typical
loss*:
|
50/50 |
60/40 |
70/30 |
80/20 |
| Single
Mode |
3.4/3.4dB |
2.6/4.6dB |
1.9/6.0dB |
1.2/7.9dB |
| Multi
Mode |
4.1/4.1dB |
3.0/5.0dB |
2.1/6.5dB |
1.7/8.2dB |
|
|
|
|
|
| *Excess
loss. |
|
connector:<0.35dB |
PDL:
<0.1dB |
|
| The
Fiber Optic Tap is available in Stand Alone and Rack Mount
version.
Rack
mount model |
You
can mix UTP, Fiber and Regeneration Taps all in the same 1U rack
plate. Also see HD
Fiber Optic Tap for High Density model.
Accessories:
1U
19" rack plate
|
|
